Tools

Accessories

EQUIPMENT AND ACCESSORIES
To ensure a correct welding, it is important to follow the WELDING PREPARATION instructions provided with the material.
Below you will find a full range of equipment required for the correct execution of the preparation operations as well as a list of complementary accessories for the installation of special parts.
Devices for pressure network drilling are also available.

Applications Accessories

2)-SCRAPE-THE-PIPE.jpg
P.49.1-F-(5).jpg
PP_RCT_ALASKA_ALEUTIAN_ISLANDS_AUGUST_2016-(1).jpg
PP_RCT_ALASKA_ALEUTIAN_ISLANDS_AUGUST_2016-(15).jpg
installation-oiltech (6).jpg
ALIGNER-WITH-BELTS_00ALL.jpg

PIPE SCRAPERS

Practical and handy, the pipe scrapers remove the oxidation layer caused by weather and ultraviolet rays. If not removed, the oxidation layer would severely compromise the quality of the joint. Among the main construction features there is a device that makes it possible to maintain the thickness of the continuous chip constant, even if the pipe is misshaped, and to adjust the length of the surface to scrape according to the depth of the electrical coupler.
  • MANUAL SCRAPER
  • REVOLVING / ORBITAL SCRAPERS
  • TURBO SCRAPER

The hand scraper is the most popular tool for the operator in charge of the welding procedure.

Very easy to use also inside the recnch.

The scraper is the most important tool for the operator in charge of the welding procedure of plastic materials, considering that scraping the oxidized PE layer
away from the external surface of the pipe is extremely important. The scraper can be positioned on pipes or on male butt welding fittings. The scraping depth
is about 0,2 mm and the width is larger than the welding area of the maximum diameter.

MODEL

REVOLVING

RAT1A

REVOLVING

RAT2A

REVOLVING

RAT3A

ORBITAL

RATOR25125

ORBITAL

RATOR63200

Nominal size range (IPS) 2"1/2" ÷ 6" 8" ÷ 16" 18" ÷ 32" 3/4" ÷ 5" 2" ÷ 8"
Weight 10.56 lb 18.48 lb 72.16 lb 3.96 lb 6.16 lb
Volume 0.8596 ft3 0.9256 ft3 - 0.2048 ft3 0.4308 ft3

Revolving scraper Tutorial

TURBO is the pipe scraper for pipes and fittings ranging from Ø 1/2" to 2" SDR 6 to 11. TURBO scraper is simple and easy to use. This incredible pipe scraper can work in confined spaces substantially reducing working times, especially during repair operations. The rotating tool allows fast and precise scraping, without defects. Its blades also allow the perfect facing of the pipe ends which have been roughly cut due to a situation which makes the use of a pipe cutter difficult, like narrow spaces. Six different sizes of the TURBO are available, according to the pipe size. TURBO has to be used with a cordless drill.

turbo scraper Tutorial

PIPE CUTTERS

The PIPE CUTTERS are professional tools, essential for the manual cut of plastic pipes up to Ø16" and practical to use. The pipe cutters are available in differents models appropriate for different diameters and also able to cut different type of materials.
  • CIRCULAR PIPE CUTTER
  • SHEAR PIPE CUTTER
MODEL SCUT3

SCUT

SCUT2

SCUTDW

(for DW system)

Nominal size range 1" ÷ 1"1/4

1"1/2 ÷ 5"

2"1/2 ÷ 6" 1" ÷ 4"
Weight 5.94 lb 2.2 lb 3.7 lb 6.6 lb
Dimensions - - - -
Spare parts - SLRCUT SLRCUT2 SLRDW
MODEL TTP

TT1540

TT1675
Nominal size range 1" ÷ 1"1/4

1"1/2 ÷ 5"

2"1/2 ÷ 6"
Weight 5.94 lb 2.2 lb 3.7 lb
Dimensions - - -
Spare parts - SLRCUT SLRCUT2

ALIGNERS

Aligners are essential for the correct welding of electrofusion fittings. Their function is to centre the pipe axis to avoid mechanical pressure inside the elecrofusion fittings, correct the weight caused by the pipe moving and keep the pipes locked during the welding procedure. The aligners are compact but strong and can be used with couplers, 45° and 90° elbows, tees and reduced tees.

  • ALIGNER WITH BELTS

Available in three different dimensional ranges up to diameters 2", 8" and 16".
Every tool has four locking points and a swivel joining part to perform all angles.

MODEL ALL063/4

ALL225/4

ALL315/4
Nominal size range 1/2" ÷ 2"

1"1/2 ÷ 8"

10" ÷ 16"
Weight 10.56 lb 45.76 lb 191.4 lb
Volume 0.5933 ft3 2.2693 ft3 11.9188 ft3


OTHERS

OTHERS
  • DRILLING MACHINE
  • POSITIONER
  • BEVELING MANUAL TOOLS

The drilling machine for high volume branch saddles has special sealed chambers to easily drill both pipes conveying gas or water under pressure and sewage pipes.
Thanks to interchangeable cutters (code 00FFxxx) and adapters (code 00FAxxx) it is possible to drill main pipelines from 3” to 40” with service lines from 2” to 6” .

MODEL

FP

Nominal Size (Pipelines) IPS 3" ÷ 40"
Nominal Size (Service line) IPS 2" ÷ 6"
Weight 30.800 lb
Volume 0.4863 ft3

Elofit positioning tool is used to clamp the top load saddle 14÷24 with outlet 2" on the pipe.

MODEL

IPOS01

Nominal Size (Pipelines) IPS

14"÷24" with outlet 2"

(For saddles without belt)

Weight 7.040 lb
Volume 0.2965 ft3

Manual tool for beveling the ends of plastic pipes for electrofusion, socket fusion, pipe connection. Range: from 1/2" to 2".